- Technology & Features
Ceramic Carbon Drag System
Our patented multi drag disk design combines carbon and ceramic washers to perfectly balance smoothness with power. The carbon washers have the job of providing stopping power and good drag lockdown while the ceramic washers provide drag consistency and smoothness.
We’ve increased the number of bearing rollers in our anti-reverse clutch bearing to improve lock up and anti-reverse durability and insure it functions properly in cold temperatures.
Foot Forward Design
The foot on every PT spinning reel is offset in relation to the stem. Why you ask? That slight offset shifts the weight of the reel rearward on the rod helping to balance today’s longer rod lengths adding that extra edge in sensitivity.
Hot Sauce Lubrication
Every PT reel comes from the factory with our proprietary PT Hot Sauce lubricants. Its formulated specifically for fishing reel applications to lower friction and increase the longevity of each reel.
Line Management System 2.0
A precisely designed geometry of the bail and line roller works in concert with the super smooth oscillation system to create level line lay while minimizing line twist.
Our proprietary spool lip design maximizes casting distance because of its unique geometry. The line comes off the lip with very little friction and is in tight coils which aids in reducing friction from the rod guides, thus longer, more effortless casts. A braid band also means you can tie braid directly to the spool without slippage.
PT Bearings are built to our exact design standards of performance specifications. We’ve tested hundreds of bearings in our Q Lab to determine the exact bearing specifications that can stand up to the abuse and stress from the most demanding anglers.
PT Gear Design
PT Gears are designed by our proprietary CAD program and manufactured to precise tolerances to yield world class smoothness. Durable high strength materials are used so your reel will handle heavy use for years to come without compromise.
Razor Rotor 2.0 Design
A CAD designed rotor perfectly balances the rotor components and minimizes weight so there is no wobble or vibration on retrieve. A skeletal design minimizes weight while maximizing strength.
Reel Engine Design
Reel Engine technology is based on an aluminum uni-body that is precision machined to provide a more solid foundation for gears and drive shaft in a single rear-accessible compartment. All critical machining is performed while the body is held in a single set-up fixture which results in a more precision machined part that aligns gears, bearings, and shafts perfectly. This results in silky smooth, super free cranking due to the more consistent and tighter tolerances.
Multiple anodize, primer, and finish coatings create a sealed barrier of saltwater protection to ward off the effects of Mother Ocean.
Most standard aluminum alloys contain impurities that create microscopic sites in the material for corrosion to occur. Our SCR alloy eliminates certain impurities from the alloy that prohibits the formation of corrosion.
A bent bail can cause the trip system to malfunction and ruin your day on the water. Our patented nickel-titanium “memory metal” will return to its original shape even after the bail is bent or dropped to keep it functioning properly. The bail is also thinner than standard bails to reduce weight and produce a more balanced feel when cranking.
- 5 Year Rock-Solid Warranty
- R·E·D™ aluminum unibody design
- EVA Handle Knobs
Continuous Anti-Reverse™ clutch
Our anti-reverse systems are designed and tested in the Q-lab to deliver a lifetime of instant hook sets.
- Changeable right- or left-hand retrieve
- 8+1 Bearings (8BB, 1RB)
NiTi™ indestructible bail
Our indestructible Nickel Titanium bail never gets bent out of shape or alignment, for a lifetime of smooth retrieves.
- Ceramic Carbon Drag System